Polymorphism enables one common interface for many implementations, and for objects to act differently under different circumstances.
C++ supports several kinds of static (compile-time) and dynamic (run-time) polymorphisms. Compile-time polymorphism does not allow for certain run-time decisions, while run-time polymorphism typically incurs a performance penalty.
Static polymorphism
Function overloading allows programs to declare multiple functions having the same name (but with different arguments). The functions are distinguished by the number and/or types of their formal parameters. Thus, the same function name can refer to different functions depending on the context in which it is used. The type returned by the function is not used to distinguish overloaded functions.
When declaring a function, a programmer can specify default arguments for one or more parameters. Doing so allows the parameters with defaults to optionally be omitted when the function is called, in which case the default arguments will be used. When a function is called with fewer arguments than there are declared parameters, explicit arguments are matched to parameters in left-to-right order, with any unmatched parameters at the end of the parameter list being assigned their default arguments. In many cases, specifying default arguments in a single function declaration is preferable to providing overloaded function definitions with different numbers of parameters.
Templates in C++ provide a sophisticated mechanism for writing generic, polymorphic code. In particular, through the Curiously Recurring Template Pattern it's possible to implement a form of static polymorphism that closely mimics the syntax for overriding virtual functions. Since C++ templates are type-aware and Turing-complete they can also be used to let the compiler resolve recursive conditionals and generate substantial programs through template metaprogramming.
Dynamic polymorphism
Inheritance
Variable pointers (and references) to a base class type in C++ can refer to objects of any derived classes of that type in addition to objects exactly matching the variable type. This allows arrays and other kinds of containers to hold pointers to objects of differing types. Because assignment of values to variables usually occurs at run-time, this is necessarily a run-time phenomenon.
C++ also provides a dynamic_cast operator, which allows the program to safely attempt conversion of an object into an object of a more specific object type (as opposed to conversion to a more general type, which is always allowed). This feature relies on run-time type information (RTTI). Objects known to be of a certain specific type can also be cast to that type with static_cast, a purely compile-time construct which is faster and does not require RTTI.
Friday, December 4, 2009
Inheritance
Inheritance allows one data type to acquire properties of other data types. Inheritance from a base class may be declared as public, protected, or private. This access specifier determines whether unrelated and derived classes can access the inherited public and protected members of the base class. Only public inheritance corresponds to what is usually meant by "inheritance". The other two forms are much less frequently used. If the access specifier is omitted, a "class" inherits privately, while a "struct" inherits publicly. Base classes may be declared as virtual; this is called virtual inheritance. Virtual inheritance ensures that only one instance of a base class exists in the inheritance graph, avoiding some of the ambiguity problems of multiple inheritance.
Multiple inheritance is a C++ feature sometimes considered controversial. Multiple inheritance allows a class to be derived from more than one base class; this can result in a complicated graph of inheritance relationships. For example, a "Flying Cat" class can inherit from both "Cat" and "Flying Mammal". Some other languages, such as Java or C#, accomplish something similar (although more limited) by allowing inheritance of multiple interfaces while restricting the number of base classes to one (interfaces, unlike classes, provide only declarations of member functions, no implementation or member data). Interfaces and abstract classes in Java and C# can be defined in C++ as a class containing only pure virtual functions, often known as an abstract base class or "ABC." Programmers preferring the Java/C# model of inheritance can choose to inherit only one non-abstract class, although in this case the declared member functions of the abstract base classes must be explicitly defined and cannot be inherited.
Multiple inheritance is a C++ feature sometimes considered controversial. Multiple inheritance allows a class to be derived from more than one base class; this can result in a complicated graph of inheritance relationships. For example, a "Flying Cat" class can inherit from both "Cat" and "Flying Mammal". Some other languages, such as Java or C#, accomplish something similar (although more limited) by allowing inheritance of multiple interfaces while restricting the number of base classes to one (interfaces, unlike classes, provide only declarations of member functions, no implementation or member data). Interfaces and abstract classes in Java and C# can be defined in C++ as a class containing only pure virtual functions, often known as an abstract base class or "ABC." Programmers preferring the Java/C# model of inheritance can choose to inherit only one non-abstract class, although in this case the declared member functions of the abstract base classes must be explicitly defined and cannot be inherited.
Encapsulation
Encapsulation is the hiding of information in order to ensure that data structures and operators are used as intended and to make the usage model more obvious to the developer. C++ provides the ability to define classes and functions as its primary encapsulation mechanisms. Within a class, members can be declared as either public, protected, or private in order to explicitly enforce encapsulation. A public member of the class is accessible to any function. A private member is accessible only to functions that are members of that class and to functions and classes explicitly granted access permission by the class ("friends"). A protected member is accessible to members of classes that inherit from the class in addition to the class itself and any friends.
The OO principle is that all of the functions (and only the functions) that access the internal representation of a type should be encapsulated within the type definition. C++ supports this (via member functions and friend functions), but does not enforce it: the programmer can declare parts or all of the representation of a type to be public, and is allowed to make public entities that are not part of the representation of the type. Because of this, C++ supports not just OO programming, but other weaker decomposition paradigms, like modular programming.
It is generally considered good practice to make all data private or protected, and to make public only those functions that are part of a minimal interface for users of the class. This hides all the details of data implementation, allowing the designer to later fundamentally change the implementation without changing the interface in any way.
The OO principle is that all of the functions (and only the functions) that access the internal representation of a type should be encapsulated within the type definition. C++ supports this (via member functions and friend functions), but does not enforce it: the programmer can declare parts or all of the representation of a type to be public, and is allowed to make public entities that are not part of the representation of the type. Because of this, C++ supports not just OO programming, but other weaker decomposition paradigms, like modular programming.
It is generally considered good practice to make all data private or protected, and to make public only those functions that are part of a minimal interface for users of the class. This hides all the details of data implementation, allowing the designer to later fundamentally change the implementation without changing the interface in any way.
Operators and operator overloading
C++ provides more than 30 operators, covering basic arithmetic, bit manipulation, indirection, comparisons, logical operations and others. Almost all operators can be overloaded for user-defined types, with a few notable exceptions such as member access (. and .*). The rich set of overloadable operators is central to using C++ as a domain specific language. The overloadable operators are also an essential part of many advanced C++ programming techniques, such as smart pointers. Overloading an operator does not change the precedence of calculations involving the operator, nor does it change the number of operands that the operator uses (any operand may however be ignored).
C++ Language Features
C++ inherits most of C's syntax and the C preprocessor. The following is Bjarne Stroustrup's version of the Hello world program which uses the C++ standard library stream facility to write a message to standard output:[7][8]
#include
int main()
{
std::cout << "Hello, world!\n";
}
#include
int main()
{
std::cout << "Hello, world!\n";
}
Standard Library in c++
The 1998 ANSI/ISO C++ standard consists of two parts: the core language and the C++ Standard Library; the latter includes most of the Standard Template Library (STL) and a slightly modified version of the C standard library. Many C++ libraries exist which are not part of the standard, and, using linkage specification, libraries can even be written in languages such as C, Fortran, Pascal, or BASIC. Which of these are supported is compiler dependent.
The C++ standard library incorporates the C standard library with some small modifications to make it optimized with the C++ language. Another large part of the C++ library is based on the STL. This provides such useful tools as containers (for example vectors and lists), iterators to provide these containers with array-like access and algorithms to perform operations such as searching and sorting. Furthermore (multi)maps (associative arrays) and (multi)sets are provided, all of which export compatible interfaces. Therefore it is possible, using templates, to write generic algorithms that work with any container or on any sequence defined by iterators. As in C, the features of the library are accessed by using the #include directive to include a standard header. C++ provides 69 standard headers, of which 19 are deprecated.
The STL was originally a third-party library from HP and later SGI, before its incorporation into the C++ standard. The standard does not refer to it as "STL", as it is merely a part of the standard library, but many people still use that term to distinguish it from the rest of the library (input/output streams, internationalization, diagnostics, the C library subset, etc.).
Most C++ compilers provide an implementation of the C++ standard library, including the STL. Compiler-independent implementations of the STL, such as STLPort, also exist. Other projects also produce various custom implementations of the C++ standard library and the STL with various design goals.
The C++ standard library incorporates the C standard library with some small modifications to make it optimized with the C++ language. Another large part of the C++ library is based on the STL. This provides such useful tools as containers (for example vectors and lists), iterators to provide these containers with array-like access and algorithms to perform operations such as searching and sorting. Furthermore (multi)maps (associative arrays) and (multi)sets are provided, all of which export compatible interfaces. Therefore it is possible, using templates, to write generic algorithms that work with any container or on any sequence defined by iterators. As in C, the features of the library are accessed by using the #include directive to include a standard header. C++ provides 69 standard headers, of which 19 are deprecated.
The STL was originally a third-party library from HP and later SGI, before its incorporation into the C++ standard. The standard does not refer to it as "STL", as it is merely a part of the standard library, but many people still use that term to distinguish it from the rest of the library (input/output streams, internationalization, diagnostics, the C library subset, etc.).
Most C++ compilers provide an implementation of the C++ standard library, including the STL. Compiler-independent implementations of the STL, such as STLPort, also exist. Other projects also produce various custom implementations of the C++ standard library and the STL with various design goals.
About c++
C++ (pronounced "See plus plus") is a statically typed, free-form, multi-paradigm, compiled, general-purpose programming language. It is regarded as a middle-level language, as it comprises a combination of both high-level and low-level language features.[1] It was developed by Bjarne Stroustrup starting in 1979 at Bell Labs as an enhancement to the C programming language and originally named "C with Classes". It was renamed to C++ in 1983.[2]
C++ is widely used in the software industry, and remains one of the most popular languages ever created. Some of its application domains include systems software, application software, device drivers, embedded software, high-performance server and client applications, and entertainment software such as video games. Several groups provide both free and proprietary C++ compiler software, including the GNU Project, Microsoft, Intel, Borland and others.
C++ is also used for hardware design, where design is initially described in C++, then analyzed, architecturally constrained, and scheduled to create a register transfer level hardware description language via high-level synthesis.
The language began as enhancements to C, first adding classes, then virtual functions, operator overloading, multiple inheritance, templates, and exception handling among other features. After years of development, the C++ programming language standard was ratified in 1998 as ISO/IEC 14882:1998. That standard is still current, but is amended by the 2003 technical corrigendum, ISO/IEC 14882:2003. The next standard version (known informally as C++0x) is in development
C++ is widely used in the software industry, and remains one of the most popular languages ever created. Some of its application domains include systems software, application software, device drivers, embedded software, high-performance server and client applications, and entertainment software such as video games. Several groups provide both free and proprietary C++ compiler software, including the GNU Project, Microsoft, Intel, Borland and others.
C++ is also used for hardware design, where design is initially described in C++, then analyzed, architecturally constrained, and scheduled to create a register transfer level hardware description language via high-level synthesis.
The language began as enhancements to C, first adding classes, then virtual functions, operator overloading, multiple inheritance, templates, and exception handling among other features. After years of development, the C++ programming language standard was ratified in 1998 as ISO/IEC 14882:1998. That standard is still current, but is amended by the 2003 technical corrigendum, ISO/IEC 14882:2003. The next standard version (known informally as C++0x) is in development
Subscribe to:
Posts (Atom)